|
|
SparkFun Zubehör USB-C is fantastic. What makes this cable even better is that one of the features we love so much about USB-C has been replicated to the USB-A 2.0 plug! These cables have minor yet genius modifications that allow them to be plugged into their ports
- CAB-15425
- SparkFun
-
1:
€ 6,32
-
5Auf Lager
|
Mouser-Teilenr.
474-CAB-15425
|
SparkFun
|
SparkFun Zubehör USB-C is fantastic. What makes this cable even better is that one of the features we love so much about USB-C has been replicated to the USB-A 2.0 plug! These cables have minor yet genius modifications that allow them to be plugged into their ports
|
|
5Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of the PCB. We recommend trimming the connector leads on the button side as short as possible to
- COM-08033
- SparkFun
-
1:
€ 12,47
-
3Auf Lager
-
1Auf Bestellung
|
Mouser-Teilenr.
474-COM-08033
|
SparkFun
|
SparkFun Zubehör This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of the PCB. We recommend trimming the connector leads on the button side as short as possible to
|
|
3Auf Lager
1Auf Bestellung
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör 7-Segment Display 6.5"" (Red)
- COM-08530
- SparkFun
-
1:
€ 30,02
-
22Auf Lager
-
56Auf Bestellung
|
Mouser-Teilenr.
474-COM-08530
|
SparkFun
|
SparkFun Zubehör 7-Segment Display 6.5"" (Red)
|
|
22Auf Lager
56Auf Bestellung
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör It's the end of the world and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED securing nut and a pre-installed long life horizontal microswitch. Button can also be adjusted
- COM-09181
- SparkFun
-
1:
€ 17,08
-
7Auf Lager
|
Mouser-Teilenr.
474-COM-09181
|
SparkFun
|
SparkFun Zubehör It's the end of the world and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED securing nut and a pre-installed long life horizontal microswitch. Button can also be adjusted
|
|
7Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile 'clicky' feel.Features:Concave plunger designDurable nylon materialMicroswitch: m
- COM-09337
- SparkFun
-
1:
€ 3,19
-
12Auf Lager
|
Mouser-Teilenr.
474-COM-09337
|
SparkFun
|
SparkFun Zubehör This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile 'clicky' feel.Features:Concave plunger designDurable nylon materialMicroswitch: m
|
|
12Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile 'clicky' feel.Features:Concave plunger designDurable nylon materialMicroswitch: m
- COM-09338
- SparkFun
-
1:
€ 3,19
-
10Auf Lager
|
Mouser-Teilenr.
474-COM-09338
|
SparkFun
|
SparkFun Zubehör This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile 'clicky' feel.Features:Concave plunger designDurable nylon materialMicroswitch: m
|
|
10Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile 'clicky' feel.Features:Concave plunger designDurable nylon materialMicroswitch: m
- COM-09339
- SparkFun
-
1:
€ 3,19
-
68Auf Lager
|
Mouser-Teilenr.
474-COM-09339
|
SparkFun
|
SparkFun Zubehör This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile 'clicky' feel.Features:Concave plunger designDurable nylon materialMicroswitch: m
|
|
68Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile 'clicky' feel.Features:Concave plunger designDurable nylon materialMicroswitch: m
- COM-09340
- SparkFun
-
1:
€ 3,19
-
3Auf Lager
|
Mouser-Teilenr.
474-COM-09340
|
SparkFun
|
SparkFun Zubehör This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile 'clicky' feel.Features:Concave plunger designDurable nylon materialMicroswitch: m
|
|
3Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile 'clicky' feel.Features:Concave plunger designDurable nylon materialMicroswitch: m
- COM-09341
- SparkFun
-
1:
€ 3,19
-
10Auf Lager
|
Mouser-Teilenr.
474-COM-09341
|
SparkFun
|
SparkFun Zubehör This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile 'clicky' feel.Features:Concave plunger designDurable nylon materialMicroswitch: m
|
|
10Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör This is a resistive analog joystick very similar to those found on the PSP1000. These compact joysticks are different in that they have a very interesting 'slide' feeling.For wiring this part if you look at the device from the bottom the pin out go
- COM-09426
- SparkFun
-
1:
€ 5,12
-
26Auf Lager
|
Mouser-Teilenr.
474-COM-09426
|
SparkFun
|
SparkFun Zubehör This is a resistive analog joystick very similar to those found on the PSP1000. These compact joysticks are different in that they have a very interesting 'slide' feeling.For wiring this part if you look at the device from the bottom the pin out go
|
|
26Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör Knobs are a great way to finish off your project and make it easier to adjust the level of your death ray. This knob mates to a 0.25" shaft. The knob slides onto the potentiometer and holds tightly with a strong friction fit.The main body of these kn
- COM-10001
- SparkFun
-
1:
€ 2,04
-
135Auf Lager
|
Mouser-Teilenr.
474-COM-10001
|
SparkFun
|
SparkFun Zubehör Knobs are a great way to finish off your project and make it easier to adjust the level of your death ray. This knob mates to a 0.25" shaft. The knob slides onto the potentiometer and holds tightly with a strong friction fit.The main body of these kn
|
|
135Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör Ever hear of a thing called RGB? Red Green Blue? How about an RGB LED? These 5mm units have four pins: one for each color and a common anode. Use this one LED for three status indicators or pulse width modulate all three and get mixed colors!Note:
- COM-10820
- SparkFun
-
1:
€ 2,56
-
155Auf Lager
|
Mouser-Teilenr.
474-COM-10820
|
SparkFun
|
SparkFun Zubehör Ever hear of a thing called RGB? Red Green Blue? How about an RGB LED? These 5mm units have four pins: one for each color and a common anode. Use this one LED for three status indicators or pulse width modulate all three and get mixed colors!Note:
|
|
155Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör If you ever find yourself connecting handfuls of resistors to the ground bus of your breadboard you may consider these SIL-packaged resistors as a time-saving alternative. This Singe In-Line component is actually 5 individual 330 Ohm resistors that
- COM-10855
- SparkFun
-
1:
€ 0,817
-
17Auf Lager
|
Mouser-Teilenr.
474-COM-10855
|
SparkFun
|
SparkFun Zubehör If you ever find yourself connecting handfuls of resistors to the ground bus of your breadboard you may consider these SIL-packaged resistors as a time-saving alternative. This Singe In-Line component is actually 5 individual 330 Ohm resistors that
|
|
17Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör Schottky diodes are known for their low forward voltage drop and a very fast switching action. This 1A 40V Schottky diode is ideal for use with motor drivers such as the L298N.
- COM-10926
- SparkFun
-
1:
€ 0,258
-
41Auf Lager
|
Mouser-Teilenr.
474-COM-10926
|
SparkFun
|
SparkFun Zubehör Schottky diodes are known for their low forward voltage drop and a very fast switching action. This 1A 40V Schottky diode is ideal for use with motor drivers such as the L298N.
|
|
41Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör LED - 5mm Cycling RGB (slow)
- COM-11450
- SparkFun
-
1:
€ 0,851
-
56Auf Lager
|
Mouser-Teilenr.
474-COM-11450
|
SparkFun
|
SparkFun Zubehör LED - 5mm Cycling RGB (slow)
|
|
56Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör Do you need that extra push over the cliff? The Small sized GTE (Goes To Eleven) Knob can fit onto potentiometers with a 6mm wide shaft thanks to a brass insert with a set screw. Unfortunately this knob does not play well with 1/4" shafts (nobody li
- COM-11951
- SparkFun
-
1:
€ 1,08
-
43Auf Lager
|
Mouser-Teilenr.
474-COM-11951
|
SparkFun
|
SparkFun Zubehör Do you need that extra push over the cliff? The Small sized GTE (Goes To Eleven) Knob can fit onto potentiometers with a 6mm wide shaft thanks to a brass insert with a set screw. Unfortunately this knob does not play well with 1/4" shafts (nobody li
|
|
43Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör These are bare non-addressable 1 meter long RGB LED strips that come packed with 60 5060 LEDs per meter. As these are bare LED strips that have no protective coating your project won't be water proof but there is access to each 5060 LED and each str
- COM-12021
- SparkFun
-
1:
€ 13,98
-
27Auf Lager
|
Mouser-Teilenr.
474-COM-12021
|
SparkFun
|
SparkFun Zubehör These are bare non-addressable 1 meter long RGB LED strips that come packed with 60 5060 LEDs per meter. As these are bare LED strips that have no protective coating your project won't be water proof but there is access to each 5060 LED and each str
|
|
27Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör Amphenol FCI Clinchr Conn. (2 POS, F)
- COM-14194
- SparkFun
-
1:
€ 2,76
-
47Auf Lager
|
Mouser-Teilenr.
474-COM-14194
|
SparkFun
|
SparkFun Zubehör Amphenol FCI Clinchr Conn. (2 POS, F)
|
|
47Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör You don't have to worry about adding a resistor to an LED if you get an LED with a built in resistor! This pack of 25 blue 5mm LEDs will help alleviate any frustrations you've had with accidentally burning them out by having a resistor in the diode i
- COM-14562
- SparkFun
-
1:
€ 11,74
-
1Auf Lager
|
Mouser-Teilenr.
474-COM-14562
|
SparkFun
|
SparkFun Zubehör You don't have to worry about adding a resistor to an LED if you get an LED with a built in resistor! This pack of 25 blue 5mm LEDs will help alleviate any frustrations you've had with accidentally burning them out by having a resistor in the diode i
|
|
1Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör These are the sturdy little stomp switches that you find on guitar effects pedals. They re 3PDT (three-pole double-throw) type switches. These switches allow you to modify your effects for true bypass and lets you wire a status indicator LED. This
- COM-15133
- SparkFun
-
1:
€ 4,25
-
26Auf Lager
|
Mouser-Teilenr.
474-COM-15133
|
SparkFun
|
SparkFun Zubehör These are the sturdy little stomp switches that you find on guitar effects pedals. They re 3PDT (three-pole double-throw) type switches. These switches allow you to modify your effects for true bypass and lets you wire a status indicator LED. This
|
|
26Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör The SparkFun Qwiic Dual Solid State Relay is a power delivery board that allows users to switch two AC loads from a low power microcontroller using the SparkFun Qwiic connect system. The board features two 25A/250VAC solid state relays that utilize t
- COM-16810
- SparkFun
-
1:
€ 134,16
-
1Auf Lager
|
Mouser-Teilenr.
474-COM-16810
|
SparkFun
|
SparkFun Zubehör The SparkFun Qwiic Dual Solid State Relay is a power delivery board that allows users to switch two AC loads from a low power microcontroller using the SparkFun Qwiic connect system. The board features two 25A/250VAC solid state relays that utilize t
|
|
1Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör This is a common MOSFET with very low on-resistance and a control voltage (aka gate voltage) that is compatible with any 3-5V microcontroller or mechanical switch. This allows you to control high-power devices with very low-power control mechanisms.
- COM-24144
- SparkFun
-
1:
€ 1,40
-
5Auf Lager
|
Mouser-Teilenr.
474-COM-24144
|
SparkFun
|
SparkFun Zubehör This is a common MOSFET with very low on-resistance and a control voltage (aka gate voltage) that is compatible with any 3-5V microcontroller or mechanical switch. This allows you to control high-power devices with very low-power control mechanisms.
|
|
5Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör The name says it all on this one. An ATmega328 in DIP package pre-loaded with the Arduino Optiboot (Uno 16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without having to use an actual Arduino board.To get t
- DEV-10524
- SparkFun
-
1:
€ 5,59
-
101Auf Lager
|
Mouser-Teilenr.
474-DEV-10524
|
SparkFun
|
SparkFun Zubehör The name says it all on this one. An ATmega328 in DIP package pre-loaded with the Arduino Optiboot (Uno 16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without having to use an actual Arduino board.To get t
|
|
101Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör The SparkFun gamer:bit is a fun-filled "carrier" board for the micro:bit that when combined with the micro:bit provides you with a fully functional game system. Designed in a similar form factor to the classic Nintendo NES controller the gamer:bit
- DEV-16129
- SparkFun
-
1:
€ 10,75
-
2Auf Lager
|
Mouser-Teilenr.
474-DEV-16129
|
SparkFun
|
SparkFun Zubehör The SparkFun gamer:bit is a fun-filled "carrier" board for the micro:bit that when combined with the micro:bit provides you with a fully functional game system. Designed in a similar form factor to the classic Nintendo NES controller the gamer:bit
|
|
2Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör The MicroMod Machine Learning Carrier Board combines some of the features of our SparkFun Edge Board and SparkFun Artemis boards but allows you the freedom to explore with any processor in the MicroMod lineup without the need for a central computer
- DEV-16400
- SparkFun
-
1:
€ 19,74
-
8Auf Lager
|
Mouser-Teilenr.
474-DEV-16400
|
SparkFun
|
SparkFun Zubehör The MicroMod Machine Learning Carrier Board combines some of the features of our SparkFun Edge Board and SparkFun Artemis boards but allows you the freedom to explore with any processor in the MicroMod lineup without the need for a central computer
|
|
8Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|