SparkFun SparkFun Zubehör

Ergebnisse: 915
Auswählen Bild Teile-Nr.
 Herst.
Beschreibung Datenblatt Verfügbarkeit Preis (EUR) Ergebnisse in der Tabelle nach dem Einheitspreis bei Ihrer Menge filtern.
Menge RoHS ECAD Model Produkt
Typ
SparkFun SparkFun Zubehör These are small spring terminals. Open the aperature with the small arm insert the wire release the arm and the wire is held firmly in place. This is a good quick way to to interface to bare wires. Capable of higher current and more resilient than Nicht auf Lager
Min.: 1
Mult.: 1

SparkFun SparkFun Zubehör This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end bare cable on the opposite end.Dimensions: 100mm lengthDocuments:JST connector
Datenblatt
Nicht auf Lager
Min.: 1
Mult.: 1

Wire & Cable Jumper Wire
SparkFun SparkFun Zubehör This is a very simple but handy 2" square double sided perf board. Standard 0.1" spacing with a 4-40 (3mm) holes for mounting. Great for quickly prototyping stackable circuits. Nicht auf Lager
Min.: 1
Mult.: 1
SparkFun SparkFun Zubehör These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don't always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board
Datenblatt
Nicht auf Lager
Min.: 1
Mult.: 1
SparkFun SparkFun Zubehör These are standard screws with 2-56 thread and 3/8" long recommended for the small button pad sets. Can be used with a 2-56 nut.Sold in single units. Nicht auf Lager
Min.: 1
Mult.: 1

SparkFun SparkFun Zubehör Description: These are standard nuts with 2-56 thread. For use with 2-56 machine screws and five button pad set listed below.Sold in single units. Nicht auf Lager
Min.: 1
Mult.: 1

SparkFun SparkFun Zubehör This 2xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control Nicht auf Lager
Min.: 1
Mult.: 1

Battery Holders
SparkFun SparkFun Zubehör This beefy heatsink is designed to dissipate a lot of heat! The 6400BG heatsink fits TO-220 TO-218 TO-247 and Multiwatt packages - which means it's a great fit for the STA540 L298N and all of our T-220 package voltage regulators. Nicht auf Lager
Min.: 1
Mult.: 1

Heat Sinks
SparkFun SparkFun Zubehör This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin Molex connector with 0.1" spacing on one end bare cable on the opposite end. It also comes with the mating connector for the Molex.D
Datenblatt
Nicht auf Lager
Min.: 1
Mult.: 1

Wire & Cable Jumper Wire
SparkFun SparkFun Zubehör This is a simple two wire cable. It has bare wires on both ends with a Molex A and B connector in the middle. With thicker 18 AWG wire it's better for higher current applications.Dimensions: 6" lengthDocuments:Datasheet
Datenblatt
Nicht auf Lager
Min.: 1
Mult.: 1
Wire & Cable Jumper Wire
SparkFun SparkFun Zubehör This is a 10-pin header with 2mm pitch that mates with our XBee socket. It can be used for making 'dummy XBees' or anything else you want!Note: This item is sold singly not in pairs.Documents:Datasheet Nicht auf Lager
Min.: 1
Mult.: 1

SparkFun SparkFun Zubehör These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table. Sold as individuals. Nicht auf Lager
Min.: 1
Mult.: 1

SparkFun SparkFun Zubehör These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table. Each standoff has an outer diameter of 6mm.Sold in packs of 10. Check below for matching sc Nicht auf Lager
Min.: 1
Mult.: 1

SparkFun SparkFun Zubehör This is a 33 meter roll of polyimide tape. This tape is a fantastic insulator like electrical tape but it can withstand temperatures as high as 258 C (496 F). It also provides good resistance to corrosion and the silicone adhesive holds tight thr Nicht auf Lager
Min.: 1
Mult.: 1
SparkFun SparkFun Zubehör This is a wire assembly terminated with a 8-pin JST-SH connector. Great for jumping from board to board or just about anything else. One end is terminated with a JST-SH connector and the other end is tinned bare wire leads.Note: The color of these wi Nicht auf Lager
Min.: 1
Mult.: 1

Cables
SparkFun SparkFun Zubehör This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control Nicht auf Lager
Min.: 1
Mult.: 1

Battery Holders
SparkFun SparkFun Zubehör Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things together using solder like the stained glass on Tiffany lamp Nicht auf Lager
Min.: 1
Mult.: 1
SparkFun SparkFun Zubehör These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won't work. The surface mount side of the legs are staggered for stress relief.This is a 6-Pin male header.Documents:Datasheet Nicht auf Lager
Min.: 1
Mult.: 1

SparkFun SparkFun Zubehör These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won't work. The surface mount side of the legs are staggered for stress relief.This is a 10-Pin male header.Documents:Datasheet Nicht auf Lager
Min.: 1
Mult.: 1

SparkFun SparkFun Zubehör These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won't work. The surface mount side of the legs are staggered for stress relief.This is an 8-Pin female header.Documents:Datasheet Nicht auf Lager
Min.: 1
Mult.: 1

SparkFun SparkFun Zubehör These are standard 0.1" spaced header pins that can be surface mounted for applications where through-hole pins won't work. The surface mount side of the legs are staggered for stress relief.This is a 6-Pin female header.Documents:Datasheet Nicht auf Lager
Min.: 1
Mult.: 1

SparkFun SparkFun Zubehör These nylon standoffs are 3/4" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table. The black nylon will give your project a very sessy look.Sold in packs of ten. Check below Nicht auf Lager
Min.: 1
Mult.: 1
SparkFun SparkFun Zubehör This 4xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover which is secured with a small phillips head screw. Another bonus is the ON/OFF switch which can be used to control Nicht auf Lager
Min.: 1
Mult.: 1

Battery Holders
SparkFun SparkFun Zubehör PCB mount clip to hold a AAA battery. Sold in single units you'll need two for each battery. These work great for small low power applications that need a battery to run. Low cost and easy to use!Documents:Datasheet Nicht auf Lager
Min.: 1
Mult.: 1

Battery Holders
SparkFun SparkFun Zubehör This 6 position screw terminal block provides a simple way to connect wires to a single connection point. These blocks allow wires to be screwed together and self-isolated without needing to twist solder or any other splicing by this method wiring Nicht auf Lager
Min.: 1
Mult.: 1