sensors SparkFun Zubehör

Ergebnisse: 54
Auswählen Bild Teile-Nr.
 Herst.
Beschreibung Datenblatt Verfügbarkeit Preis (EUR) Ergebnisse in der Tabelle nach dem Einheitspreis bei Ihrer Menge filtern.
Menge RoHS ECAD Model Produkt
Typ
SparkFun SparkFun Zubehör Infrared proximity sensor made by Sharp. Part # GP2Y0A21YK has an analog output that varies from 3.1V at 10cm to 0.4V at 80cm. The sensor has a Japanese Solderless Terminal (JST) Connector. We recommend purchasing the related pigtail below or solderi 4Auf Lager
Min.: 1
Mult.: 1
Sensors
SparkFun SparkFun Zubehör The QRE1113 is a small IR reflectance sensor. This sensor is often used in line following robots because if it can sense if a surface is white or black.There are four pins on the QRE1113 - two control the IR emitting LED while the other two are the 15Auf Lager
Min.: 1
Mult.: 1
Sensors
SparkFun SparkFun Zubehör This AT407 basic tilt switch can easily be used to detect orientation. Inside the can is a ball that make contact with the pins when the case is upright. Tilt the case over and the balls don't touch thus not making a connection.There are numerous us 19Auf Lager
Min.: 1
Mult.: 1
Sensors
SparkFun SparkFun Zubehör The US1881 is an integrated Hall effect latched sensor. That's nice but what does it do? Holding a magnet near the sensor will cause the output pin to toggle. This makes for a robust presence sensor. A reed sensor also works nicely but can be limite 6Auf Lager
Min.: 1
Mult.: 1
Sensors
SparkFun SparkFun Zubehör One-Wire Ambient Temp Sensor MAX31820 21Auf Lager
Min.: 1
Mult.: 1

Sensors
SparkFun SparkFun Zubehör Amphenol FCI Clinchr Conn. (2 POS,M)
Datenblatt
26Auf Lager
45Auf Bestellung
Min.: 1
Mult.: 1

Connectors Male FCI Clincher Connector with 2 Position
SparkFun SparkFun Zubehör Amphenol FCI Clinchr Conn. (3 POS,M)
Datenblatt
14Auf Lager
Min.: 1
Mult.: 1

Connectors Male FCI Clincher Connector with 3 Position
SparkFun SparkFun Zubehör Amphenol FCI Clinchr Conn. (3 POS,F)
Datenblatt
8Auf Lager
Min.: 1
Mult.: 1

Connectors Female FCI Clincher Connector with 3 Position
SparkFun SparkFun Zubehör This sensor uses an infrared emitted diode combined with an infrared phototransistor to detect the reflected infrared signal. Ideal for sensing black-to-white transitions or can be used to detect nearby objects (.5-1cm). 1 282Auf Lager
Min.: 1
Mult.: 1
SparkFun SparkFun Zubehör Stackable Header 3 Pin, Female 0.1in 62Auf Lager
Min.: 1
Mult.: 1
SparkFun SparkFun Zubehör LilyPad Slide Switch 20Auf Lager
Min.: 1
Mult.: 1

Switches
SparkFun SparkFun Zubehör Piezo Element 81Auf Lager
Min.: 1
Mult.: 1

Accessories Audio Indicators & Alerts
SparkFun SparkFun Zubehör LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very standard yellow LED. The lens is 3mm in diameter and it is diffused.Features:2.0-2.4VDC forward dropMax current 98Auf Lager
Min.: 1
Mult.: 1
Optoelectronics LED
SparkFun SparkFun Zubehör LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very basic 5mm LED with a red lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA. 89Auf Lager
150Auf Bestellung
Min.: 1
Mult.: 1

Optoelectronics LED
SparkFun SparkFun Zubehör LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very basic 5mm LED with a green lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA.Fe 68Auf Lager
Min.: 1
Mult.: 1
Optoelectronics LED
SparkFun SparkFun Zubehör LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very basic 5mm LED with a blue lens. It has a typical forward voltage of 3.4V and a rated forward current of 30mA.Fea 25Auf Lager
Min.: 1
Mult.: 1
Optoelectronics LED
SparkFun SparkFun Zubehör LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very standard green LED. The lens is 3mm in diameter and is diffused.Features:2.0-2.4 VDC forward dropMax current: 2 14Auf Lager
Min.: 1
Mult.: 1
Optoelectronics LED
SparkFun SparkFun Zubehör LED - Basic Red 3mm 54Auf Lager
Min.: 1
Mult.: 1

SparkFun SparkFun Zubehör The new generation 18 pin PICAXE microcontroller now has parallel tasking touch sensors and more memory/RAM.See the Info Sheet for a comparison of features between the 18M2 and the 18M2+PICAXE is a neat entry-level microcontroller system that is rel 25Auf Lager
Min.: 1
Mult.: 1
SparkFun SparkFun Zubehör Photo interrupter photogate photodiode phototransistor whatever you want to call it this sensor is composed of an infrared emitter on one upright and a shielded infrared detector on the other. By emitting a beam of infrared light from one uprigh 34Auf Lager
15Auf Bestellung
Min.: 1
Mult.: 1
SparkFun SparkFun Zubehör Alligator Test Leads Multicolored 10 pac 211Auf Lager
Min.: 1
Mult.: 1
Test Equipment
SparkFun SparkFun Zubehör LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very basic 5mm LED with a yellow lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA.F 9Auf Lager
Min.: 1
Mult.: 1

Optoelectronics LED
SparkFun SparkFun Zubehör This miniature straight bar load cell (sometimes called a strain gauge) can translate up to 500g of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to and proportional
Datenblatt
105Auf Lager
63Auf Bestellung
Min.: 1
Mult.: 1

Sensors Mini Load Cell - 500g, Straight Bar
SparkFun SparkFun Zubehör This miniature straight bar load cell (sometimes called a strain gauge) can translate up to 100g of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to and proportional
Datenblatt
95Auf Lager
Min.: 1
Mult.: 1

Sensors Mini Load Cell - 100g, Straight Bar
SparkFun SparkFun Zubehör The SparkFun Qwiic MicroPressure Sensor is a miniature breakout equipped with Honeywell's 25psi piezoresistive silicon pressure sensor. This MicroPressure Sensor offers a calibrated and compensated pressure sensing range of 60mbar to 2.5bar easy to
Datenblatt
61Auf Lager
Min.: 1
Mult.: 1
Nein
Sensors